Accessories

These are velocity driven and the centrifugal force generated, creates a low pressure area, which draws out stale, damp and hot air through these ventilators, and the fresh air is automatically replaced. Turbo ventilators being wind driven, save on energy, are pollution free and virtually maintenance free.

Canopies are basically used as a cover at the entrance of the building, as a shade for parking the cars, loading and unloading of trucks, block sunlight and rain. The canopies can extend along the full or partial length of the walls of the building.

Sliding Doors provided are of liner slide motion type. The frame of these doors is supported on free moving wheels fitted with bearings and so designed that it can easily move in the guide. The doors are so designed that they add to the aesthetic beauty of the structure.

The Louvers are mainly used to maintain a regular flow of fresh and natural air in the industrial and storage areas. They, in combination with Turbo Ventilators, help in reducing the built-up of dust, vapour and heat inside the building.

Fascias Fascias are mainly provided for concealing the part or all of the Gable Roof, Soffit, Trims, Gutters & Downspouts. It also provides proper colour coordination to the Fascia Sheeting.This adds beauty to the structure and gives it an adequate facelift.

A proper drainage system of the roof is an integral part of the Pre-Engineered Building Structures. This is mainly to prevent water overflow over the sides through Gutters & properly spaced Downspouts.

Roof Monitors are basically for fulfilling exact ventilation and lighting requirements. The size of the monitors can be adjusted to suit any specification. It is provided with proper angel to protect from rain, provision of wire mash prevents intrusion of birds.

The nuts & bolts provided by us are Self Drilling, Self Trapping Screws & Fasteners, which are coated with a combination of Tin-Zinc Coating which is mechanically deposited. This coating prevents the accumulation and formation of impurities, Moisture, Rust, and Electrical Current, on and around the steel/metal surface.

Flashings & Trims create an air of artistic harmony and splendor of the Pre Engineered Building Structures. These are sheet metal closures designed primarily to protect from weathers effects and neat appearance at corners and junctions.

The FRP sheets provided by us are water resistant, non-combustible, and environment friendly. As they are translucent and transparent in nature they save drastically on the Electricity Bills.